Capacity: 300 kg. The console-mounted wire rope SW-K LAMBDA DGUV V17/18 (BGV C1) was developed for use in shopping galleries, churches, sports facilities and performing areas (stages, studios, theaters etc.).
State-of-the-art design with galvanized side sections for easy handling.
Grooved drum for single-layer winding of the steel rope.
An 18:1 ratio between drum and rope diameter increases the service life of the rope substantially
With spring-loaded rope pressure roller to prevent the unloaded rope from jumping off the drum.
Gear rated for twice the nominal load.
Spur gear drive for optimal efficiency and comfortable handling.
The fitted safety crank with two spring brakes acting independently of each other for safe holding of the load in any position.
In compliance with DGUV Vorschrift 17 (BGVC1) and DIN 56925. Certified by the German committee for lifting equipment (GS-approval-tested safety).
OPTIONS:
Drum extension for a larger rope capacity.
Special grooves (several layers).
You are now leaving Columbus McKinnon
Columbus McKinnon's website and/or mobile terms, privacy and security policies don't apply to the site or app you're about to visit. Please review its terms, privacy and security policies to see how they apply to you.
Middle East - EN
