Uni-Life Track Close Up
Uni-Life Cover Image v1
Uni-Life Cover Image v2
Unified Uni-Life Complete Fall Protection System
Uni-Life Profile
Uni-Life Track Close Up
Uni-Life Cover Image v1
Uni-Life Cover Image v2
Unified Uni-Life Complete Fall Protection System
Uni-Life Profile

Unified Uni-Life Track Fall Protection System

Uni-Life Track Close Up
Uni-Life Cover Image v1
Uni-Life Cover Image v2
Unified Uni-Life Complete Fall Protection System
Uni-Life Profile
Uni-Life Track Close Up
Uni-Life Cover Image v1
Uni-Life Cover Image v2
Unified Uni-Life Complete Fall Protection System
Uni-Life Profile

When you need to safeguard operators from accidental slips and falls in elevated work areas, Uni-Life Track™ Fall Protection System is designed for both permanent and temporary applications.

Uni-Life Track is designed for fall arrest when working at height. It can also be used for work positioning and targeted access, allowing a person to ascend and descend to a specific area easily and safely. These systems can be used in industrial applications or paired with truss for the entertainment industry.

Features and Benefits

Unified’s lightweight aluminum enclosed track rail systems and components are designed to maximize productivity without sacrificing safety. Now, we are utilizing the same principles and components from our years of material handling experience to provide you with a safe, ergonomic fall protection system – Uni-Life Track Complete Fall Protection System.

Comprised of an anchor system, body harness and connection point, Uni-Life Track offers a total solution to safe guard against accidental fall from elevated work areas, while helping you comply with OSHA requirements and ANSI standards.

Because Uni-Life Track’s unique enclosed track aluminum system is rigid, it offers critical safety and cost advantages, including:

  1. Reduced secondary injuries from the primary fall by providing a stable anchorage between two endpoints. And, the Uni-Life Track trolley will immediately stop if a fall occurs.
  2. Reduced fall clearance because the rigid anchor system does not need to have a factor built in for deflection in the event of a fall. This is especially useful in low-headroom situations.
  3. Lower total cost of ownership due to fast and easy installation. System end trucks come preassembled on bridges, hangers and end stops preassembled and packaged by system.


There are 3 major components to every Uni-Life Track complete fall protection system:

1. Anchor System

At the heart of the system is Unified's Enclosed Track Aluminum (ETA) rail. This lightweight, easy-to-install, rigid track system provides facilities with smooth, quiet, and clean operation. When combined with our anchor trolley, which uses dual bearing load wheels and guide rollers, we offer the lowest rolling resistance in the industry. The low rolling resistance allows the anchorage trolley to seamlessly self-track above the operator, reducing the risk of a swing fall.

2. Body Harness

A properly fit, full body harness is required for the operator to attach to the lanyard connection point. Unified offers the highest quality body harnesses on the market.

3. Connection

The connection point where the operator is engaged with the anchor system. Unified offers a self-retracting lanyard to provide minimum fall distance and maximum mobility.

Uni-Life Track™ Anchor System

Unified’s Uni-Life Track system is one of the most critical pieces of a complete fall protection system. The aluminum profiles we use are lightweight and with enclosed track, the rolling surface stays clean and free of debris. Our systems are custom designed for your specific application and available for use with single or multiple workers. All systems are designed to meet or exceed the standard set forth by ANSI Z359.1. Whether you are unloading a flat-bed trailer or working on a wing of an airplane, our representatives and engineers will work to customize the exact system to meet your needs.

In addition to meeting the ANSI Z359.1 standard, Uni-Life Track™ systems also meet the following standards:

  • Aluminum Enclosed Track Standards
  • ANSI MH27.2 - Specifications for Enclosed Track Under hung Cranes and Monorail Systems
  • Welded to AWS D1.1-00 Structural Welding Code - Steel AWS Certified Welders
  • CMAA Standards
  • Free Standing Structures
  • AISC - Manual of Steel Construction

Rail Composition & Profiles

  • Extruded from 6005-T5 Series aluminum
  • Lightweight: 45% lighter than steel bridges
  • Enclosed track design