Skip to main content
How To Buy
CMLA-C Series Industrial Linear Actuators
CMLA-C Series Industrial Linear Actuators

CMLA-B Series - 1,000 Lbs

Linear Actuators

CMLA-C Series Industrial Linear Actuators
CMLA-C Series Industrial Linear Actuators
The CMLA-B Series 1000 lb. capacity, Ball screw linear actuator with IP66S protection rating and hardened gears, screws, and lifting nuts is a robust and reliable device designed for demanding industrial applications requiring accurate linear motion and high load capacity. The use of ball bearings minimizes friction, leading to smoother operation and higher energy efficiency compared to traditional lead screws.
Free Application Analysis
Linear Actuator Design Guide CMLA-B Product Sheet CMLA-B Specs and Part Numbers CMLA-B Dimensional Drawing

Features and Benefits

FEATURES AND BENEFITS

Rated Load

Fully rated at 1000 lbs to handle dynamic loads both in compression and tension

Lifting Speed

Lifting speeds up to 1.2 in/sec at rated load

Standard stroke lengths

3.9 in, 5.9 in ,11.8 in, 17.7 in, and 23.6 in

Safety

Safety clutch aids in the prevention of damage due to accidental overload conditions

Options

OPTIONS

  • Screw Types: Both ball screw and trapezoidal screw models available
  • Motor Voltages: 115Vac or 230Vac single phase
  • Electric brake: Standard on ball screw models
  • Feedback: Position feedback potentiometer
  • Limit Switch: Adjustable limit switches

Specifications

CMLA B Series 1000 lb Product Specifications
Capacitor Model Motor Max. Dynamic Load Max. Static Load Screw Gear Motor Power Amperage Lifting Speed Duty Cycle Capacitor Rating
# Type (lbs) N (lbs) N Type Ratio Volts Amps (in/s) mm/s (in/hr) m/hr mdf
SK6405-7-15 AC (1000) 4500 (1500) 6672 Trapezoid 14.2 115 7 (0.56) 14.2 (360) 9.1 50
192002120 AC (1000) 4500 (1500) 6672 Trapezoid 14.2 230 3.4 (0.56) 14.2 (360) 9.1 12.5
SK6405-7-15 AC (1000) 4500 (1500) 6672 Ball 8.1 115 7 (1.12) 28.5 (600) 15.2 50
192002120 AC (1000) 4500 (1500) 6672 Ball 8.1 230 3.4 (1.12) 28.5 (600) 15.2 12.5
SK6405-7-15 AC (250)§ 1112 (1500) 6672 Ball 2.1 115 7 (4.3) 109.2 (2300) 58.5 50
192002120 AC (250)§ 1112 (1500) 6672 Ball 2.1 230 3.4 (4.3) 109.2 (2300) 58.5 12.5
§Quad Speed - Lower ratio reduces rated load to 250 lbs. No clutch
Notes:
1. The correct capacitor mfd should be used for each model or the cylinder will not perform as rated.
2. Order Hard Start Kit 192036494 for applications where high starting torque is required (low temperature, high starting load)

Models

CMLA B Series 1000 lb Dimensions

CMLA-A-500.jpg