Duff-Norton | Rotating Ball Screw

									Rated Loads
Model Number	T Screw Diameter	Turns of Worm 1 in Travel		Torque lb./in. at 1000 lb. Loads		Motor RPM	1/4 HP Motor		1/3 HP Motor		1/2 HP Motor		3/4 HP Motor		Lifting Speed inch/minute
		Ratio		Ratio			Ratio		Ratio		Ratio		Ratio		Ratio
		5:1	20:1	5:1	20:1		5:1	20:1	5:1	20:1	5:1	20:1	5:1	20:1	5:1	20:1
M-2462	1.00 Dia. x 1.000 Lead Ball Screw	5	-	5.3	-	1725	100	-	200	-	300	-	500	-	345	-
M-2462	1.00 Dia. x 1.000 Lead Ball Screw	5	-	5.3	-	1140	200	-	300	-	500	-	700	-	228	-
M-2463	1.00 Dia. x 0.250 Lead Ball Screw	20	80	1.3	0.6	1725	600	1500	900	2000	1300	-	2000	-	86	21
M-2463	1.00 Dia. x 0.250 Lead Ball Screw	20	80	1.3	0.6	1140	1000	-	1300	-	2000	-	-	-	57	14
Notes: 1. Model M-2462 and M-2463 are self lowering and a motor brake must be used. 2. Due to hight travel speed of BM-2462, it is important that a brake with a minimum response time be used. An independently controlled direct acting brake (6ft-lb for 3/4 HP Motors and 3ft-lb for smaller motors is recommended. 3. When ordering other than 56C-face actuators contact applications engineering at 800-477-5002.

Modular - Rotating Ball Screw