Find a contact

Modular - Translating Ball Screw

RATED LOADS: from 2,000 lbs, varies with gear ratio and motor HP
STANDARD STROKE: up to 24 inches
SPEED: to 170 in/min (varies with load and HP/RPM of motor)

Specifications

Rotating Ball Screw Model Specifications
Model Number T Screw Diameter Turns of Worm 1 in Travel Torque lb/in at 1000 lb Loads Motor 1/4 HP Motor Rated Load 1/3 HP Motor Rated Load 1/2 HP Motor Rated Load 3/4 HP Motor Lifting Speed in/min
    5:1 Ratio 20:1 Ratio 5:1 Ratio 20:1 Ratio RPM 5:1 Ratio 20:1 Ratio 5:1 Ratio 20:1 Ratio 5:1 Ratio 20:1 Ratio 5:1 Ratio 20:1 Ratio 5:1 Ratio 20:1 Ratio
M-2464 1.00 Dia. x 1.000 Lead Ball Screw 5 - 5.3 - 1725 100 - 200 - 300 - 500 - 345 -
M-2464 1.00 Dia. x 1.000 Lead Ball Screw 5 - 5.3 - 1140 200 - 300 - 500 - 700 - 228 -
M-2465 1.00 Dia. x 0.250 Lead Ball Screw 20 80 1.3 0.6 1725 600 1500 900 2000 1300 - 2000

-

86

21
M-2465 1.00 Dia. x 0.250 Lead Ball Screw 20 80 1.3 0.6 1140 1000 - 1300 - 2000 - - - 57 14

Notes:
1. Model M-2464 and M-2465 are self lowering and a motor brake must be used.
2. Due to hight travel speed of BM-2464, it is important that a brake with a minimum response time be used. An independently controlled direct acting brake (6ft-lb for 3/4 HP Motors and 3ft-lb for smaller motors is recommended.
3. When ordering other than 56C-face actuators contact applications engineering at 800-477-5002.

Models

Rotating Ball Screw Model Dimensions

Modular-RBS.jpg