Camlok® CG Girder Turning Clamp
Lifting Clamps
Capacity: 1000 - 2000 kg
The CG Girder Turning Clamp is designed for the transport of girders, metal plates, profiles etc. CG Clamps can lift and turn girders through 90º and are designed to meet the requirements of the heavy steel industry
Features & Benefits
FEATURES and BENEFITS:
- They are general purpose clamps and can be used on rolled steel joists, beams, and fabrications up to a surface hardness of 300 Brinell (32HRc)
- Can lift and turn beams up to 90º and are designed to land the beam in either the vertical or horizontal position.
- The offset position of the clamp will allow beams to be turned H-I and I-H.
- Fitted with a cam/spring-operated safety lock. The positive safety lock keeps the clamp safely locked, even before the lift begins.
- This allows the operator to place the clamp, lock it closed and move away from the load.
- The lever ensures easy opening and closing of the clamping jaw and has a “lock open“ feature.
- For long girders, fabrications and welded structures, two clamps and a lifting beam may be require
- Design factor 4:1
INFO:
- The surface hardness of the material must not exceed HRC 30/Brinell 300..
- The minimum load is marked on the side of the clamp.