Lugs and C-Hooks

Working load limit (WLL): 500 - 3000 kg
The TCS coil turning hooks are specifically designed to pick up coils of steel or banding material which are laying flat.

Working load limit (WLL): 500 - 10000 kg
The Camlok TCK C-Hooks have been designed to safely and efficiently handle coils, rolls, rings, pipes, round stock and other similar loads.

Working Load Limit (WLL): 2000 kg
The TTB big bag lifter is designed to lift and transport standard large bulk bags safely and securely.

Working load limit (WLL) 32000 - 56000 kg
These container lifting lugs are supplied, and used, in sets of 4. They have a total lifting capacity of up to 56 tonne. The CLB and CLT lugs serve as flexible lashing points for the transportation of containers.
Two types are available dependant upon where you want to fasten them; to the side or the top of the container.
The CLB model is mounted horizontally to the side of the container at either the top or the bottom fixing holes.
This model has a spring loaded bolt to prevent accidental release.
The CLT type is vertically mounted in the hole at the top of the container and is locked into place by simply turning the lug 900. This configuration allows for transportation via the use of a lifting frame in conjunction with cables, chains or slings.
Product group: I2

Working Load Limit (WLL): 500 - 3000 kg
The Camlok Shearlegs have been designed to be simple, easy to erect and operate.

Capacity: 1000 -2000 kg
The Fork Lift Cross Beam Model FLTH sits on the two forks with the swivelling hook between.