Skip to main content
How to Buy
Modular Actuator - Translating Ball Screw Photo
Modular Actuator - Translating Ball Screw Photo

Modular - Translating Ball Screw

Modular Actuators

Modular Actuator - Translating Ball Screw Photo
Modular Actuator - Translating Ball Screw Photo

Modular actuators can be easily adapted to different applications by combining or modifying modules. They can be scaled up or down to meet specific force and speed requirements, making them suitable for a wide range of applications. Individual modules can be replaced or repaired without affecting the entire system, reducing downtime.

Modular Actuator Spec Sheet Linear Actuator Design Guide Duff-Norton Product Capabilities Brochure

Features and Benefits

FEATURES AND BENEFITS

The outer aluminum tube is corrosion-resistant protecting the translating tube, and lifting screw and nut

A wiper-scraper seal at the end of the outer tube keeps dirt out and lubricants in

A bronze guide bushing inside of the outer tube reduces lateral movement of the translating screw

The translating is tube zinc coated for weather-resistance

Single or quadruple lead ball-bearing type lifting screw and nut for higher efficiency and long life

Vent in outer tube prevents pressure build-up in the actuator

Furnished with standard clevis end on translating tube. A threaded end is available through special order depending on the application Any type of threaded connection may be substituted.

Specifications

Rotating Ball Screw Model Specifications
Model Number T Screw Diameter Turns of Worm 1 in Travel Torque lb/in at 1000 lb Loads Motor 1/4 HP Motor Rated Load 1/3 HP Motor Rated Load 1/2 HP Motor Rated Load 3/4 HP Motor Lifting Speed in/min
    5:1 Ratio 20:1 Ratio 5:1 Ratio 20:1 Ratio RPM 5:1 Ratio 20:1 Ratio 5:1 Ratio 20:1 Ratio 5:1 Ratio 20:1 Ratio 5:1 Ratio 20:1 Ratio 5:1 Ratio 20:1 Ratio
M-2464 1.00 Dia. x 1.000 Lead Ball Screw 5 - 5.3 - 1725 100 - 200 - 300 - 500 - 345 -
M-2464 1.00 Dia. x 1.000 Lead Ball Screw 5 - 5.3 - 1140 200 - 300 - 500 - 700 - 228 -
M-2465 1.00 Dia. x 0.250 Lead Ball Screw 20 80 1.3 0.6 1725 600 1500 900 2000 1300 - 2000

-

86

21
M-2465 1.00 Dia. x 0.250 Lead Ball Screw 20 80 1.3 0.6 1140 1000 - 1300 - 2000 - - - 57 14

Notes:
1. Model M-2464 and M-2465 are self lowering and a motor brake must be used.
2. Due to hight travel speed of BM-2464, it is important that a brake with a minimum response time be used. An independently controlled direct acting brake (6ft-lb for 3/4 HP Motors and 3ft-lb for smaller motors is recommended.
3. When ordering other than 56C-face actuators contact applications engineering at 800-477-5002.

Models

Rotating Ball Screw Model Dimensions

Modular-RBS.jpg