RATED LOADS: from 2,000 lbs, varies with gear ratio and motor HP
STANDARD STROKE: up to 24 inches
SPEED: to 170 in/min (varies with load and HP/RPM of motor)
The outer aluminum tube is corrosion-resistant protecting the translating tube and the lifting screw and nut
Furnished with standard clevis end on translating tube. A threaded end is available as a special order depending on the application. Any type of threaded connection may be substituted
The wiper-scraper seal located in the end of the outer tube keeps dirt out and lubricants in
The translating tube is zinc coated for weather-resistance
A bronze guide bushing inside of the outer tube reduces lateral movement of the translating screw
Single or double lead lifting screw and nut for high efficiency and long wear
A vent located in the outer tube prevents pressure build-up in the actuator
Translating Machine Screw Specifications |
||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Rated Loads | ||||||||||||||
| Model Number | T Screw Diameter | Turns of Worm 1 in. Travel | Torque lb./in. at 1000 lb. Loads | Motor | 1/3 HP Motor | 1/2 HP Motor | 3/4 HP Motor | Lifting Speed inch/minute | ||||||
| # | 5:1 Ratio | 20:1 Ratio | 5:1 Ratio | 20:1 Ratio | RPM | 5:1 Ratio | 20:1 Ratio | 5:1 Ratio | 20:1 Ratio | 5:1 Ratio | 20:1 Ratio | 5:1 Ratio | 20:1 Ratio | |
| M-2464 | 0.875 Dia. Acme 0.25 Pitch RH Double |
10 | 40 | 39 | 18 | 1725 | 300 | 700 | 500 | 1000 | 700 | 1500 | 170 | 43 |
| M-2464 | 0.875 Dia. Acme 0.25 Pitch RH Double |
10 | 40 | 39 | 18 | 1140 | 450 | 1000 | 700 | 1500 | 1100 | 2000 | 114 | 28 |
| M-2465 | 1.0 Dia. Acme 0.25 Pitch RH Single |
20 | 80 | 29 | 14 | 1725 | 400 | 900 | 600 | 1400 | 900 | 2000 | 86 | 21 |
| M-2465 | 1.0 Dia. Acme 0.25 Pitch RH Single |
20 | 80 | 29 | 14 | 1140 | 600 | 1400 | 900 | 2000 | 1400 | 2000 | 57 | 14 |
|
Notes: |
||||||||||||||
Translating Machine Screw Dimensions |
|---|
North America - EN
