Find a contact

Lodestar Classic Electric Chain Hoist

Electric Chain Hoists

The CM Lodestar Electric Chain Hoist is recognized as the standard in overhead lifting. Generations of users have relied on the power and dependability of the CM Lodestar® for their material handling applications.

CM Lodestar Classic Brochure

Features & Benefits

FEATURES and BENEFITS:

  • Available as individual hoist units, in hoist/trolley combinations or as integral components of complete lifting systems and can be used in numerous applications and industries.
  • H4 Duty makes hoist ideal for heavy-duty industrial applications.
  • Gearing designed for exceptionally long life and quiet operation. Gear train lifetime lubricated with non-oxidizing grease.
  • Hoist duty motor, standard overload protection device and standard screw-type limit switches
  • Hardened, forged-steel, latch-type hooks and Hoistaloy load chain for long, dependable service
  • Precision machined and hardened liftwheel with hardened chain guides to ensure chain fits tightly and securely in liftwheel.
  • Rugged control station (NEMA 4X).
  • Voltage board allows you to quickly change from low voltage to high voltage by simply repositioning the receptacle.
  • Easy to install and maintain with no special tools required for disassembly.
  • Made in the USA and comes with a lifetime warranty
  • Each hoist is thoroughly inspected and tested to over 125% of rated load prior to shipment
  • Meets ASME B30.16

 

SPECIAL APPLICATION:

  • Harsh environment hoists available for rugged applications, including plating, galvanizing and washdown applications.
  • Hoists with climbing capability available for temporary rigging or lifting applications - must be used in inverted position only.
  • Hoists with creep control allow precise positioning through field adjustment within the time delay range of .05 sec. to 3 sec.
  • Articulating suspension available for 3 ton only.

 

SPECIFICATIONS:

  • Ambient temperature range for optimal performance at the H4 duty cycle is 0º f (-17ºc) to 104º f (40ºc).
  • Operation is permissible up to 150°F (65°C) when running at a reduced Duty Cycle; the frequency of Hoist operation must be limited to avoid overheating of motor.
  • Special provisions should be made to ventilate the space and/or shield the Hoist from radiation.
  • Condition and operation of the Hoist should be monitored to avoid damages and injury when operating above 104°F (40°C).
  • Reference the Hoist's Operation and Maintenance Manual.
  • Contact factory for requests below 0°F (-17°C).