Find a contact
Actuators
Actuators

Hy-Thrust Actuators

Actuators
Actuators

Magnetek actuators are electro-hydraulic devices which combine all the basic elements of a hydraulic system into one integral unit, consisting of an electric motor driving a hydraulic pump, piping, working cylinder and piston.

Electro-Hydraulic Thrusters Brochure

Features & Benefits

Features and Benefits

The function of the actuator is to convert electrical energy into a mechanical force hydraulically, producing a smooth straight line thrust, throughout the piston stroke. They are mainly used to release spring-set brakes like the MBT, MST and SDT.

THREE AVAILABLE ACTUATORS:

  • AC three phase (Ed type)
  • AC three phase explosion-proof (EdF type)
  • DC (Eg type)

Magnetek offers the Ed type of 60 Hz actuator in 208VAC, 230/460VAC and 575VAC three phase versions. Other voltages from 110VAC to 690VAC, 50 Hz versions, explosion proof and DC (220VDC) actuators are available with longer lead times.

STANDARD FEATURES:

  • Fast response - 2000 cycles per hour
  • Long service life with minimum maintenance
  • Extending forces from 50 lbs. to 900 lbs.
  • Strokes from 2 to 7.8 inches
  • Can be stalled at any stroke position without damage.
  • Operating ambient temperature -25°C to +50°C with standard fluid (other ranges available on request)
  • Class F insulation
  • Aluminum housings

OPTIONS:

  • Internal compression spring
  • Externally adjustable, stepless time delays - both directions (S) (H)
  • Vacuum poured stator windings
  • Special paint for corrosion protection or easier decontamination
  • Internal heaters for below -30 Deg. C ambient (110V or 220V)
  • Explosion proof models available in VDE EEx d II and EEx d I
  • Cast iron housings for nuclear applications