Connecting shaft ZR range are used to link individual drive-system elements to a centrally driven lifting system as a whole. They dampen vibrations and sudden impackts, comensate axial, radial and angular desplacements and can be used up to critical speed without pillow blocks
The fitting of pillow blocks allows the shaft lenkgt to be doubled or further mulitplied, althought a limit of 6m is imposed with one-piece-configuration due to the standard lengths of tube normally available.
ZR range:
Rotary speed range: n= 1500 min-1
Operating temperature: - 40 to 90°C (briefly up to 120°C)
Highly flexible connecting shafts ZR connect individual drive elements to complete lifting systems with a central drive.
They dampen vibrations and shocks, compensate for axial, radial and and angular misalignments and can be used up to critical speed without pedestal bearings (see speed-length diagram).
By using pedestal bearings, the shaft length L can be doubled or quadrupled. However, in the case of a one-piece
limited by the commercially available tube length to a length of 6 m.
4 different designs are available for different speed ranges and requirements.
ZR range:
Rotary speed range: n= 1500 min-1
Operating temperature: - 40 to 90°C (briefly up to 120 °C)
Columbus McKinnon Engineered Products GmbH
Am Silberpark 2-8 | 86438 Kissing | Deutschland
Telefon Vertrieb: +49 8233 2121 777
APAC - English - EN
