Camlok iclamp THK Image
Camlok THK  Horizontal plate clamps picture
Camlok iclamp THK Image
Camlok THK  Horizontal plate clamps picture

Camlok® THK Horizontal Plate Clamps

Lifting Clamps

Camlok iclamp THK Image
Camlok THK  Horizontal plate clamps picture
Camlok iclamp THK Image
Camlok THK  Horizontal plate clamps picture

Working Load Limit: 40 - 9000 kg
The THK Horizontal Plate Clamps share the same basic design features as the CH range of clamps but have a reversed tooth jaw design. This safety feature is designed for use with thin sheets which may have a tendency to deflect or sag or flex.

Features & Benefits

FEATURES and BENEFITS:

  • It is normally used in combination with a two-legged chain sling.
  • Ideal clamp for thin sheets.
  • The capacity applies to a pair of lifting clamps.
  • Designed to lift and transport thin steel plates in the horizontal position
  • The reverse jaw feature ensures that the grip of the clamp increases the more the plate deflects under its own self weight
  • Clamps are used in pairs with a two legged chain sling. Two pairs of clamps supported from a lifting beam must be used when handling long plates
  • Only lift one plate at a time
  • Max sling angle 30° from vertical.
  • Suited to thin plate with a surface hardness less than 300
  • Brinell/32 Rockwell C
  • Design factor 4:1
  • Product group: I2

 

INFO:

  • These plate clamps are service-friendly, making it easy to exchange parts, which are readily available.
  • Clamp repairs must be done by a trained person.
  • The plate surface of the material being clamped must have a hardness level below HRC 30/Brinell 300.
  • The angle from the vertical MUST NOT exceed 30°.
  • Shackles are not included.