Contact Us
CET-UHFC Photo
CET-UHFC Photo

Underhung Formed Channel

End Trucks & Carriages

CET-UHFC Photo
CET-UHFC Photo
Budgit Hoists' Underhung Formed Channel End Truck
Underhung Crane Bridge Kits Manual 113535-27 Budgit End Trucks Brochure Underhung Formed Channel Crane Bridge Kits Parts and Instructions Manual

Features and Benefits

Budgit formed-channel end trucks are designed with safety, reliability, and performance in mind. Built for single-girder applications, Budgit end trucks are available in both under-hung and top-running styles. Whether you need push-type, hand-geared, or motorized configurations, Budgit end trucks are an economical and easy-to-install option for any crane system or application.

CAPACITY: Up to 5 tons
SPAN: Up to 48 ft. at 3-ton max. capacity and 36 ft. at 5-ton max. capacity

  • Rigid steel weldment, reinforced at the wheel axles and girder connection
  • Truck weldment uses formed-channel sides and structural steel plates complete with welded girder pads and end plates, forming a rigid U-shaped structure
  • Wheels are solid forged steel and rotate on two sealed, lifetime-lubricated ball bearings and are heat treated with a hardness of 220-250 BHN
  • Single-flange wheels have a compound tread for operation on American Standard I-beams or wide flange beams
  • Wheel diameter is 4” on 3-ton trucks and 6-1/2” on 5-ton trucks. Patented track wheels are available for both capacities
  • Push-type and geared-type, under-hung end trucks are designed in accordance with CMAA specifications

Additional Features

GEAR REDUCERS

A right-angle, shaft-mounted worm drive gear reducer can be mounted at either end of the bridge. The gear reducers can be mounted on either top-running or under-hung end trucks. Traverse reducer provides stopping motion of the bridge within a distance in feet equal to 10 percent of full load speed in feet per minute (traveling at maximum speed with maximum rated load).

MOTOR

Drive motor is a 1/2 or a 3/4 horsepower squirrel cage motor that is NEMA design 30-minute rated TENV with Class “F” insulation. The motor is provided with thermal overload protection as standard, with C-face mounted to the gear reducer. Single-phase and three-phase motors (½ hp only) are available. Voltages available in single and two speed are 208-230-460-575 volt-3ph-60Hz. Voltages available in single speed only are 115-230 volt-1ph-60Hz. Contact us for any other special speeds or voltages.

CROSS SHAFT COUPLING

The cross shaft couplings connect the cross shaft to the pinion shaft at each end truck, as well as couple sections of cross shaft.

CROSS SHAFT SUPPORT

Features lifetime-lubricated bearings. For hand-geared and single-drive, motor-driven cranes, cross shafts are required. The cross shafts are to be 1” diameter AISI 1018 cold drawn steel.

CONTROL PANEL

The control panels include mainline contactor, 115-volt control circuit transformer with fused secondary terminal strip, bridge fusing, and reversing contactor in a NEMA 1 enclosure. NEMA 4/12 panels are available as an option.

FUSED DISCONNECT SWITCH

Fused disconnect switch box has positive power disconnect and crane fusing. NEMA 1 enclosure is standard with NEMA 4/12 available as an option.

Options

Optional Features

  • Bridge brake
  • Electronic acceleration control
  • Air motor drive package
  • Bridge bumpers
  • Variable frequency control
  • Ballast resistors
  • Thermal overload relays
  • Spark resistance (Hand-geared and push-type trucks)
  • Patented track