Software Downloads

Magnetek Material Handling & Elevator Software Downloads

By downloading software from the Columbus McKinnon website, you agree to the terms of our License Agreement. Please read before downloading. **Please note, Apache Log4j is NOT used in any CMCO software

 

SPA Linear Actuator with Intelli-Motion
SMART Actuator EDS File v1.1 March 9, 2022     Download
SMART Actuator UDT (for Studio 5000) March 9, 2022     Download
SMART Actuator Configurator Installer August 31, 2022     Download
Flex IR Programmer
IR Programmer 3.4.7.112 January 25, 2018     Download
Firmware January 25, 2018 Release Notes   Download
Refer to the IR Programmer manual for instructions on how to install the software and update the firmware.
IMPULSE Link 5
 Version 5.12.9 October 23, 2023 Release Notes System Requirements Download
IMPULSE Link 5 Viewer and Professional are contained in the same software installer. The Professional version requires a USB licensing key and is included in the purchased software kit.
The setup application is contained in the compressed .zip file. For the application to run properly, it is recommended that you first extract all files.
IMPULSE Link 4.1 WDS
IMPULSE Link 4.1 WDS
Update v4.1.35
December 12, 2018 Release Notes System Requirements Download
This update will not install unless a prior version exists on your PC.
The setup application depends on other compressed files in the Download folder. For the application to run properly, it is recommended that you first extract all files.

NOTE: Support for IMPULSE Link 4.1 was officially ended at the start of calendar year 2020. Firmware updates for the Magnetek drives released in 2020 and beyond will not be supported in IMPULSE Link 4.1. IMPULSE Link 5 Professional is the functional replacement for IMPULSE Link 4.1 Basic and WDS. Contact Magnetek Sales for upgrade information.
IMPULSE Link 4.1 Basic
IMPULSE Link 4.1 Basic
Update v4.1.35
December 12, 2018 Release Notes System Requirements Download
This update will not install unless a prior version exists on your PC.
The setup application depends on other compressed files in the Download folder. For the application to run properly, it is recommended that you first extract all files.

NOTE: Support for IMPULSE Link 4.1 was officially ended at the start of calendar year 2020. Firmware updates for the Magnetek drives released in 2020 and beyond will not be supported in IMPULSE Link 4.1. IMPULSE Link 5 Professional is the functional replacement for IMPULSE Link 4.1 Basic and WDS. Contact Magnetek Sales for upgrade information.
DataLogger Series 4
Firmware v4.2002 February 19, 2020 Release Notes   Download
The DataLogger Series 4 firmware file is flashed using IMPULSE Link 5 Viewer.
EDS Files
IMPULSE EDS Files v1.008 April 15, 2019     Download
EDS files for the EtherNet/IP (SI-EN3) option card compatible with the IMPULSE Series 4, G+ Mini, and D+ HHP.
GSDML Files
IMPULSE GSDML Files v2.3 April 15, 2019     Download
GSDML files for the ProfiNET (Si-EP3) option card compatible with the IMPULSE Series 4, G+ Mini, and D+ HHP.
OmniPulse DDC Series 2
Firmware 44301.32 August 1, 2020 Release Notes   Download
Firmware is flashed using the "DDC-S2/DMC-S2 Flash Utility" which is included in the IMPULSE Link 5 software.
MagnePulse DMC Series 2
Firmware 41330.24 August 19, 2020 Release Notes   Download
Firmware is flashed using the "DDC-S2/DMC-S2 Flash Utility" which is included in the IMPULSE Link 5 software.
OmniPulse DDC Series 1
Firmware 3.22A May 4, 2015 Release Notes   Download
Cost Saving Analysis Software April 11, 2006     Download
MagnePulse DMC Series 1
Firmware 10.04A February 22, 2016 Release Notes   Download
Firmware Flasher Program  January 14, 2008 Instructions   Download
Radio Programming Software
Programming Software for telePilottelePendant   Device Notes   Download
Radio Control Programmer v3.0.7 December 2, 2019 Release Notes   Download


Drivers

DataLogger Series 3/3+ - Windows 64bit Drivers
USB Copy Stick Driver Installation Instructions
USB Copy Stick Driver
Keyspan USA-19HS Driver – Windows 2000, XP, 2003 Server, and Vista
Keyspan USA-19HS Driver – Windows 2008 Server R2, 7, 8, and 10

 
 Elevator Drive Configuration Software – MagExplorer (HPV Series, Quattro, M1000, HPV1000 Drives)

   
MagExplorer Install Program Version 2.51.15

MagExplorer Instructions (TM7371 Rev 05)

MagExplorer Driver for use on HPV900 S2 (CP210x_VCP_Win_XP_S2k3_Vista_7.zip) (Compatible with Windows XP, Vista and 7 32/64-bit)

MagExplorer Driver for use on HPV900 S2 (CP210x_Universal_Windows_Driver.zip) (Compatible with Windows 10)